You are not logged in. Please login or register.
SmoothVideo Project → Posts by MAG79
When you playback video with potplayer and SVP works via ffdSHow do you see the same results? Looks like 15 fps too?
Try to change renderer: madVR, EVR are recomended.
Error is:
05:11:43.280: [vapoursynth] Could not initialize VapourSynth scripting.
05:11:43.280: [user_filter_wrapper] Creating filter 'vapoursynth' failed.
Do you have mpv not from SVP bundle?
SVP needs mpv with vapoursynth support.
You can select what you want.
- NVENC is NVIDIA hardware encoding. It works faster but quality low a bit.
- H.264/H.265 Software encoding. It gives better quality, have a lot of settings but uses CPU and works slower.
> software CRF = 12
It is extremely low. I use 18 for most cases.
It is not simple question about corresponding software and NVENC settings to get the same quality. Approximate answer you can get when switching from software to NVENC. As I can see CRF=12 corresponds to 35 Mbit/s.
About astect ratio (AR). In general case it must be the same as in the source.
Looks like you have video with unreadable aspect ratio. So acpect ratio was reset in output video.
You can fix AR by third party tools or use additional encoder options in SVP Encoder-Advanced mode.
In quick manual by pressing button ? I found these options about aspect ratio:
--ovcopts=aspect= sample aspect ratio
--ovcopts=sar= sample aspect ratio
You can use them.
Both MPC-HC and MPC-BE needs to adding ffdShow raw. MPC-HC installed with SVP is already has this setting.
https://www.svp-team.com/wiki/Manual:Video_players
To eliminate hungs try to change SVP setting "Reset on Seek": SVP menu Application settings - Additional options.
With value "Don't reset" you can see some frames from the past for few seconds just after rewind.
> Can I set up a converting queue?
Yes.
https://www.svp-team.com/wiki/Manual:SV … code_Usage
While encoding, you can enqueue more files as well as pause or cancel transcoding process.
> Does the image lose quality after converting?
Yes.
It is full transcoding. With completely decoding source frames and encoding them together with interpolated frames.
You can minimize quality lose by adjusting encode settings. Start from settings by default. It is most common settings to get not very big file size with not visible quality lose for human eyes.
It working so. At beginning video playback SVP must to detect framerate, select profile and start to calcuate new frames to frame buffer then start to display them.
You will see stutter at the beginning.
If you want to watch high framerate video without stutter in loop then transcode this video first via SVP and watch its interpolated version from disk.
disable option: Application settings - Show OSD messages
Duckers
I've just checked with MPC-HC and Ctrl-Arrow Down. It is still working to me. At speed 0.5x and 0.25x. No problem. Look at SVP status and in SVP logs.
SVP does all other stuff:
- Detect and cut black bars
- Another frame crop and frame resize
- Outer lighting
You can use option "Temporarily disable SVP" in SVP menu to completely disable SVP processing.
Черные полосы. Они влияют на результат. Их надо отрезать.
4k = 3840x2160 = 8M points
your resolution = 5400x2700 = 14.5M points
---
in 2 times more points
30 fps and 60 fps = in 2 time more frames.
---
Your task is in 4 times more complicated than task for 4k 30FPS.
Is your processor in 4 times faster? 
Советы такие:
1. Обновиться до SVP 4.3.0.191. В числе исправлений: fixed wrong SVP window size with screen scale >100%
2. Если не помогает, то править файл C:\Program Files (x86)\SVP 4\ui-scale.txt
Прошу сообщить какой из советов помог
tip: Use MPC-HC x64 player and NVIDIA CUVID decoder
What video player are you using?
I think you have already read this:
SVP: 4K and HDR
FAQ: Video lagging and stuttering on 120+ Hz monitor
Попробовать в potPlayer разные режимы растяжения кадра. Горячие кнопки Ctrl-Enter, Alt-Enter и Ctrl-Alt-Enter
Why you need more than one video at once.
How you watch it?
(I can watch only one video at once).
BTW. When I playback two videos 24fps and 30fps simultaneously they both playback with SVP at 60fps without any issues.
Check SVP setting value in menu - Application settings - Additional options - Running multiply videos. It must be setted to: Use SVP in all opened videos
Your link is working to me via SVPtube 2 with mpv player.
To send problem report use SVP menu - Information - Send problem report...
P.S. with VLC player this link is working too. Repeat instruction steps carefully:
https://www.svp-team.com/wiki/SVP:VLC
Youtube link is working to me. Any youtube video from youtube.com main page.
What error do you get?
Can you give your link to youtube video?
You can send us problem report. We will see your logs with error details.
Did you provide your authentication data to SVPtube?
https://www.svp-team.com/wiki/Manual:SV … n_Websites
You are right. Thank you for information. I confirm the issue.
Looks like the option "Force the exact value" is not working for some reason.
We will look what is it and how to fix it.
Did you reassemble your PC or change some hardware?
Check your Memory mode. It must be Dual channel mode. Use CPU-Z software.
Check your PCIe speed. It must be x16 (or x8). Use Render test with GPU-Z software.
What player are using when you "launch a video normally"?
You just need to setup your player first.
https://www.svp-team.com/wiki/Manual:Video_players
For some reason detected framerate 25 fps is changed to crazy value 4789 fps. Smoothing become disabled in this case and use smooth ratio 1x = no inserting interpolated frames.
Normal fps value:
22:07:23.029 [i]: Media: video 1280x720 [PAR 1.000] at 25.000 fps [constant] (via video player)
...
22:09:10.306 [i]: Playback [c29da30c]: playing at 60 [25 *12/5] Crazy FPS value:
22:09:22.119 [i]: Playback [c29da30c]: source frame rate changed to 4789.27
...
22:09:22.130 [i]: Playback [c29da30c]: playing at 4789.27 [4789.27 *1/1] Try:
- another video file;
- disable automatic black bars detection in SVP. Looks like framerate is changing after frame size change. SVP menu - Video frame - Detect and cut off black bars;
- change your multi-monitor configuration into one-monitor configuration by disabling or detaching another screens.
It is frame blending on hard places.
It is solution to avoid artifacts in cartoons where one frame have a lot of differences from another one.
What you expect in this cases?
> Как правильно его обозначить/подключить?
algo:10
https://www.svp-team.com/wiki/Manual:SVPflow
Это 3D-анимация, рендерится каждый кадр, значит движение есть в каждом кадре. Я бы смотрел с профилем "фильм".
SmoothVideo Project → Posts by MAG79
Powered by PunBB, supported by Informer Technologies, Inc.