1

(296 replies, posted in Using SVP)

Installed ubuntu this time, and no error on the install stage.

now when playing a video on SMplayer i got this:

 Playback [21645d50]: enabled while video is playing
 Profile: using automatic profile #1 /film
 Playback [21645d50]: playing at 143.856 [29.97 *24/5] 
 Profile: using automatic profile #1 /film
 Playback [21645d50]: playing at 143.856 [29.97 *24/5] 
 Profile: using automatic profile #1 /film
 Playback [21645d50]: playing at 143.856 [29.97 *24/5] 
 Profile: using automatic profile #1 /film
 Playback [21645d50]: playing at 143.856 [29.97 *24/5] 
 Playback [21645d50]: VS - Script evaluation failed:
 Playback [21645d50]: VS - File reading exception:
 Playback [21645d50]: VS - [Errno 13] Permission denied: '/root/.local/share/SVP4/scripts/21645d50.py'
21:02:30.936 [E]: Playback [21645d50]: VS - could not init VS

My root folder there is a big X on it, could this be the problem, SVP needs permission, and if yes, how can i do it? THanks.

2

(296 replies, posted in Using SVP)

Hello there,

I'm using elementary OS, and at the end of the mpv with vapoursynth installation i got this error.

 "The project was not configured: run "waf configure" first!"

When i try to enable the SVP with VLC it does not work, it says that i need to install the vlc support or check the vapoursynth install.
SMPlayer does not work also.

3

(124 replies, posted in Using SVP)

Problems that i`ve crossed so far..

1. VLC + SVP does not work with every single video, especially FLV videos, don`t know why..

2. some videos are getting blue color, like if someone else manually changed the hue color settings. When i turn SVP off, the color goes back to normal. This is the error that shows up > 06:35:18.254 [E.]: QWindowsPipeWriter: GetOverlappedResult failed. (O pipe foi finalizado.)

3. Native 1920x1080 videos is always playing a little choppy, far from a smooth experience , as reported from Chainik, SVP filter can't increase frame size.

4

(124 replies, posted in Using SVP)

It`s cool for people who enjoy watching video with VLC, but i still prefer DAUM Potplayer

I could barely get a smooth video motion with VLC.

5

(124 replies, posted in Using SVP)

Fixed.

6

(124 replies, posted in Using SVP)

I finally make it work...

You guys just follow this tutorial.. https://www.svp-team.com/wiki/SVP:VLC


How to set environment variables
How to set folder permissions

7

(124 replies, posted in Using SVP)

For those who is getting this error, follow this tutorial..

https://www.svp-team.com/wiki/SVP:VLC

it explains everything.

8

(124 replies, posted in Using SVP)

Now i`ve managed to make vapour show up.


It`s happening the same error as blotto5 reported..

14:23:00.348 [E]: VLC: File reading exception:\n[Errno 22] Invalid argument: 'global svppath=\C:\\Users\\Guilherme\\AppData\\Roaming\\SVP4\\\\ntry {\n   import(svppath+\scripts\\3f4.avs\)\n}\ncatch(err_msg) {\n   ffdshow_source().Subtitle(err_msg)\n   WriteFileStart(svppath+\logs\\err-3f4.avs.log\, \err_msg\)\n}\n'
14:23:06.036 [I.]: Report: collecting information...

9

(124 replies, posted in Using SVP)

Hi, Chainik

I did everything as you posted..

10:51:03.841 : Main: module 'plugins64/svpflow1_vs.dll': 4.0.0.132
10:51:03.841 : Main: module 'plugins64/svpflow2_vs.dll': 4.0.0.132
10:51:03.841 : Main: VLC filter: 0.9.0.76

But i just don`t know how to do this part

1. add SVP 4/mpv64 folder to the PATH environment variable
2. add new env variable called PYTHONPATH, containing the same SVP 4/mpv64 path

Could you post some images to help?

10

(2 replies, posted in Using SVP)

Hi there

I just would like to congratulate you guys, this new version of SVP is really good, you can really see the improvement.

I saw the post that one of you guys did on doom9, that linear light thing is really impressive.

Keep it up the amazing work.

Cheers.

11

(4 replies, posted in Using SVP)

Thanks for the post:1, Chainik.

It works like a charm.

12

(4 replies, posted in Using SVP)

Mag,

I was testing a slow mo video and i liked  ST  more than IP, yes, it's not a big thing.

I have another question if you don't mind...

change the smooth.rate.num in the override.js based on the width of the video, is that possible?

I tried this :

mynum = width <= 1200 ? "2" : "2";
mynum = width > 1200 ? "2" : "2";
mynum = width > 700 ? "3" : "3";

smooth.rate.num            = " + mynum + ";
smooth.rate.den            = 1;


It didn't work at all.... i wonder why...

Thanks again.

13

(4 replies, posted in Using SVP)

Hi

I'd like to know how can i save the change in the ffdshow pulldown, cuz every time svp runs, it goes back to Ignore Pulldown and i'd like to change and save to Smooth Timestamps.


http://i.imgur.com/D7jLeiP.jpg



Do i need to change something in the override.js file?

Thanks.

14

(9 replies, posted in Using SVP)

I'd like to say thanks for all of you that tried to help me, all this features was disabled already.

I think it must be a hardware problem like hard drive, gpu or memory...i'll test that later.

Thanks again.

15

(9 replies, posted in Using SVP)

Here what it is...

all my videos it's like this \/ ( like ghost, even and odd lines )
http://i.imgur.com/kD0ozyQ.jpg



I'd like to be like this \/
http://i.imgur.com/jXz0vB1.jpg



That's crazy, because this problem started a week ago, before that i never had such problem.

16

(9 replies, posted in Using SVP)

https://www.mediafire.com/?vhmtmcd62puhcd2

17

(9 replies, posted in Using SVP)

Hi

I'm with a problem, all my videos, using svp or not, using ffdshow or not, on the scene changes the video it's leaving an ugly frame trail/shadow i really don't know the name of that thing.

It's like that,  a hand, leg, head, whatever it's moving the video leaves it's frame in there, what a normal video should do it's get blurry, but my it's not getting blurry it's all sharpen and with a ugly pre/frame or something, i'll post a SS.


http://i.imgur.com/DgokXMU.jpg


See on that 'gun machine', the edge of that thing, it's all sharp and with some frames left, and it would suppose to be all blurry.

This problem started like a week ago, so i decided to reinstall my W7, unfortunately the problem it's still there for my surprise.

So everything indicates it may be a hardware problem? Since i'm using three different Media Player ( Pot, KM and MPC )

Have you ever seen anything like this?

Thanks, and sorry for the horrible english.

18

(2 replies, posted in Using SVP)

The problem was my Avisynth plugin folder, there was some corrupted plugins, it's solved now. Thanks.

19

(2 replies, posted in Using SVP)

Hi

I decided to reinstall my W7, so i just finished installing everything.

If i do not open SVP Manager the video works perfect, no crash, no lag, the ffdshow icon appears on the bottom of the window and etc..

Now if i open SVP i get the crash error, and yes, i've already applied the 4GB patch and it didn't work.

Tried with Potplayer, MPC, Kmplayer.... all with the same error.

Microsoft Visual c++ instaled
Netframe work
Java
Directx..


the error \/

http://i.imgur.com/5cyt7hB.jpg

20

(2 replies, posted in Using SVP)

MAG79


Thanks for your answer,

EDIT: It was deinterlace, your were right MAG... my nvidia inverse telecine was checked. Thank you very much.

21

(2 replies, posted in Using SVP)

Hi

First of all, it's not a problem with SVP, i just would like to know with someone can help me with something that it's buggin me... Devs can delete this topic anytime you want.

It all started after i installed a W7 pack, all my videos  now gets oversampling, ghosting... something like that, yes, i tried the restore and backup option but it didn't work.

using any video player ( Kmplayer, Potplayer, Media Classic )

Here \/ it's a bmp with the 'bug', on the left it's the bug version and on the right it's splash pro, which for somehow it's not bugged.

[img]http://i.imgur.com/EcSgfc3.jpg[/img]

Maybe a dll in computer it's corrupted and now every renderer ( EVR, Madvr, Overlay .... ) it's affect.

Does anybody every see something like that?

Thanks for reading, and sorry the horrible english.


EDIT: Solved, nvidia inverse telecine was the problem.

22

(15 replies, posted in Using SVP)

I don't know if it's against the rules to bring back old topics, but any news about this 'wave effect'?

I got better results using a dot crawl script, LUTDeCrawl.

If anyone test it someday you can copy the .avsi in the avisynth plugins page.

the code that i'm using > LUTDeCrawl(ythresh=10, cthresh=10, maxdiff=50, scnchg=25, usemaxdiff=true, mask=false)

23

(3 replies, posted in Using SVP)

Again Chainik, thanks.... you're awesome.

its working.

24

(3 replies, posted in Using SVP)

Hi

I'd like to change the Num generator based on the width of the video, how can i make this script work?

Width <= 1200 ? Eval("""
S = V.SVSuper("{rc:false,gpu:1, scale:{up:2, down:2}}")
A = S.SVAnalyse("{main:{coarse:{distance:-1, bad:{SAD:20}}},penalty:{pzero:1,pnbour:1000}}, refine:[{thsad:20}]}")
V.SVSmoothFps(S, A, "{rate:{num:50000,den:1001,abs:true},algo:21, mask:{area:30,cover:100,area_sharp:1.0},scene:{blend:false,mode:0,limits:{blocks:100}}}", url=URL, mt=100)
GetMTMode(false) > 0 ? distributor()
"""): last
Width > 1200 ? Eval("""
S = V.SVSuper("{rc:false,gpu:1, scale:{up:2, down:2}}")
A = S.SVAnalyse("{main:{coarse:{distance:-1, bad:{SAD:20}}},penalty:{pzero:1,pnbour:1000}}, refine:[{thsad:20}]}")
V.SVSmoothFps(S, A, "{rate:{num:60000,den:1001,abs:true},algo:21, mask:{area:30,cover:100,area_sharp:1.0},scene:{blend:false,mode:0,limits:{blocks:100}}}", url=URL, mt=100)
GetMTMode(false) > 0 ? distributor()
"""): last

I added V = V.Width, and i get an error saying there is ":" missing, so i change ": last" and i put after "distributor()" ... but nothing seems to work.


Thanks

25

(3 replies, posted in Using SVP)

Chainik

Wow, Thank you very much Chainik and Mag79

S = thisclip.SVSuper .. it really works.