2,476 Reply by RickyAstle98 (edited by RickyAstle98 20-11-2025 08:10:55)

  • Thanks: 95

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

dawkinscm wrote:

BTW I've just seen someone running SVP with my settings. The RTX 4080 runs at around 100% on my machine. The 5090 runs the same settings at 38%!!!

Just seen someone running SVP exactly my settings (5 days ago / LSFG ontop)
RTX 4070 OC peaks 88% GPU usage @ 1.100V (72C)
RTX 5090 peaks 35% GPU usage @ 0.960V (55C)

2,477 Reply by dawkinscm (edited by dawkinscm 20-11-2025 08:11:29)

  • Thanks: 241
  • Thanks for the post: 1

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

RickyAstle98 wrote:
dawkinscm wrote:

BTW I've just seen someone running SVP with my settings. The RTX 4080 runs at around 100% on my machine. The 5090 runs the same settings at 38%!!!

Just seen someone running SVP exactly my settings (5 days ago), about 90% usage on my RTX 4070 OC, while 5090 running 35% at low voltages (0.960 instead of 1.100V)!

It's a bit of a beast. Turn everything up and it still doesn't break 50%. With something like that you realize how much of the smoothness you see depends on the GPU.

2,478 Reply by RickyAstle98 (edited by RickyAstle98 20-11-2025 08:13:57)

  • Thanks: 95

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

dawkinscm wrote:
RickyAstle98 wrote:
dawkinscm wrote:

BTW I've just seen someone running SVP with my settings. The RTX 4080 runs at around 100% on my machine. The 5090 runs the same settings at 38%!!!

Just seen someone running SVP exactly my settings (5 days ago / LSFG ontop)
RTX 4070 OC peaks 88% GPU usage @ 1.100V (72C)
RTX 5090 peaks 35% GPU usage @ 0.960V (55C)

It's a bit of a beast. With something like that you realize how much of the smoothness depends on the GPU.

Requote my previous post please, updated details, not depends, smoother on my GPU lmao!

2,479 Reply by dawkinscm (edited by dawkinscm 20-11-2025 08:53:16)

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

RickyAstle98 wrote:
dawkinscm wrote:
RickyAstle98 wrote:

Just seen someone running SVP exactly my settings (5 days ago / LSFG ontop)
RTX 4070 OC peaks 88% GPU usage @ 1.100V (72C)
RTX 5090 peaks 35% GPU usage @ 0.960V (55C)

It's a bit of a beast. With something like that you realize how much of the smoothness depends on the GPU.

Requote my previous post please, updated details, not depends, smoother on my GPU lmao!

It basically brute forces SVP into working, so even running with IC at 8% is still smooth.  No need for LSFG, config files or anything else. Seen it with my own eyes. I'm sure LSFG helps with smoothness overall, but this just works.

2,480 Reply by RickyAstle98 (edited by RickyAstle98 20-11-2025 09:49:31)

  • Thanks: 95

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

dawkinscm wrote:
RickyAstle98 wrote:
dawkinscm wrote:

It's a bit of a beast. With something like that you realize how much of the smoothness depends on the GPU.

Requote my previous post please, updated details, not depends, smoother on my GPU lmao!

It basically brute forces SVP into working, so even running with IC at 8% is still smooth.  No need for LSFG, config files or anything else. Seen it with my own eyes. I'm sure LSFG helps with smoothness overall, but this just works.

Its always system dependant, on my machine, SVP (RIFE) works better than friends beast setup, different drivers can make huge difference, especially on high end machines.
As 4070 user, can clearly state 50 series lmao expensive thing, no need for LSFG? You cant do 4K X10 on 5090 yet!

Im talking about people who have very high refresh monitors like 360 Hertz or even greater! I will upgrade to 600Hz monitor soon!

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

RickyAstle98 wrote:
dawkinscm wrote:
RickyAstle98 wrote:

Requote my previous post please, updated details, not depends, smoother on my GPU lmao!

It basically brute forces SVP into working, so even running with IC at 8% is still smooth.  No need for LSFG, config files or anything else. Seen it with my own eyes. I'm sure LSFG helps with smoothness overall, but this just works.

Its always system dependant, on my machine, SVP (RIFE) works better than friends beast setup, different drivers can make huge difference, especially on high end machines.
As 4070 user, can clearly state 50 series lmao expensive thing, no need for LSFG? You cant do 4K X10 on 5090 yet!

Im talking about people who have very high refresh monitors like 360 Hertz or even greater! I will upgrade to 600Hz monitor soon!

So what do you do about the fast motion artifacts?

  • Thanks: 95
  • Thanks for the post: 1

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

dawkinscm wrote:
RickyAstle98 wrote:
dawkinscm wrote:

It basically brute forces SVP into working, so even running with IC at 8% is still smooth.  No need for LSFG, config files or anything else. Seen it with my own eyes. I'm sure LSFG helps with smoothness overall, but this just works.

Its always system dependant, on my machine, SVP (RIFE) works better than friends beast setup, different drivers can make huge difference, especially on high end machines.
As 4070 user, can clearly state 50 series lmao expensive thing, no need for LSFG? You cant do 4K X10 on 5090 yet!

Im talking about people who have very high refresh monitors like 360 Hertz or even greater! I will upgrade to 600Hz monitor soon!

So what do you do about the fast motion artifacts?

Nothing, just doing RIFE x3 + 240Hz target!

  • Thanks: 160
  • Thanks for the post: 1

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

dawkinscm wrote:

BTW I've just seen someone running SVP with my settings. The RTX 4080 runs at around 100% on my machine. The 5090 runs the same settings at 38%!!!

Wow, that is insane haha

2,484 Reply by dawkinscm (edited by dawkinscm 03-12-2025 01:23:10)

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

RickyAstle98 wrote:
dawkinscm wrote:
RickyAstle98 wrote:

Its always system dependant, on my machine, SVP (RIFE) works better than friends beast setup, different drivers can make huge difference, especially on high end machines.
As 4070 user, can clearly state 50 series lmao expensive thing, no need for LSFG? You cant do 4K X10 on 5090 yet!

Im talking about people who have very high refresh monitors like 360 Hertz or even greater! I will upgrade to 600Hz monitor soon!

So what do you do about the fast motion artifacts?

Nothing, just doing RIFE x3 + 240Hz target!

It turns out that there are two bottlenecks, not just the GPU because SVP also seems to have an upper processing limit. Even with my GPU running at 50%, I can't go above 80fps before the movement becomes choppy with 4K 3D movie files. LSFG takes me well above 80fps but SVP is smoother so using them both together, they compliment each other.

I finally got SVP working with LSFG 3.1 Fixed. 4K 3D input, SVP Rife (4.25-4.26 heavy) set to 60Hz and IC 6%.  For watching movies, anything above 60Hz shows no obvious difference, so sticking to 90-120Hz. But  I can easily do 240Hz even though flow scale is 100%. I just wish there was a Rife model with even less artifacts. Running IC at 4% reduces artifacts to the bare minimum but its choppy for slow pans so I'm using 6-8%.


Thanks telling us about LSFG smile

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

Hello, I'm trying to get RIFE optimized for my setup in MPC-HC with vapoursynth. I'm running an i9-9900KS with an RTX 3080 Ti, targeting 4k (24fps) sources for realtime playback with whatever gains I can get out of my hardware. I honestly have not had much luck(video verrrrry sluggish) with realtime 4k playback even with very conservative settings, but I have been reading the heavy gains a few folks have seen with some newer models and settings tweaks. Right now I have SVP up to date with RIFE set to the 4.25 model. Not trying to do the impossible, just seeing if I can get more out of the hardware I do have, but understanding that with 4k these kinds of things are extremely demanding even on the latest gen hardware. Any guidance would be appreciated.

2,486 Reply by RickyAstle98 (edited by RickyAstle98 06-12-2025 07:34:46)

  • Thanks: 95

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

@Chainik, what happened to new update? The mpv update broken, prevents filters usage.

Or just put download link to 0.40.0-290 please?

2,487 Reply by Chainik

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

> what happened to new update?

what happend?

2,488 Reply by Honza

  • Thanks: 8

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

RickyAstle98 wrote:

Or just put download link to 0.40.0-290 please?

Update in SVP gives me 0.40.0-291

2,489 Reply by dawkinscm (edited by dawkinscm 06-12-2025 13:09:50)

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

RickyAstle98 wrote:

@Chainik, what happened to new update? The mpv update broken, prevents filters usage.

Or just put download link to 0.40.0-290 please?

I've been using my own mpv version for a few years. The current svp version of mpv is well behind more recent builds which helps to fix issues with modern srgb and gamma2.2 displays. This especially helps with near black issues.

2,490 Reply by RickyAstle98 (edited by RickyAstle98 06-12-2025 14:56:47)

  • Thanks: 95

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

Honza wrote:
RickyAstle98 wrote:

Or just put download link to 0.40.0-290 please?

Update in SVP gives me 0.40.0-291

I need 290 lmao, some VF filters ignored in 291 build, cant find this build in internet.

Update: I FIX ISSUE MYSELF AGAIN.

2,491 Reply by Chainik

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

> some VF filters ignored in 291 build

be more specific

  • Thanks: 95

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

Chainik wrote:

> some VF filters ignored in 291 build

be more specific

Net.

2,493 Reply by Chainik

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

ok, I assume there're no problems with the current build then

2,494 Reply by dawkinscm

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

RickyAstle98 wrote:
Chainik wrote:

> some VF filters ignored in 291 build

be more specific

Net.

I don't understand what is going on with LSFG. Most of today it was working perfectly with or without SVP with no artifacts (except from SVP). It was also accepting 120Hz from my display settings as the base for interpolation and not 24Hz from the video. That has stopped working and the LSFG artifacts are back. Tried a reboot just to make sure. But all the problems I had before are now back and I have no idea why.

2,495 Reply by Chainik

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

guys, this topic is about RIFE, not lsfg

2,496 Reply by RickyAstle98

  • Thanks: 95

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

Chainik wrote:

guys, this topic is about RIFE, not lsfg

We know, but we use RIFE through SVP and also upgrading everything w/LSFG ontop smile

2,497 Reply by dawkinscm

Re: New RIFE filter - 3x faster AI interpolation possible in SVP!!!

OK the artifacts issue is just one movie.  I can get 120 natively but  with LSFG  I suppose I can only get 120 by running SVP at 60 with 2 multiplier.