You are not logged in. Please login or register.
SmoothVideo Project → Using SVP → My Custom Script Setting Opinion (Smooth like DmitriRender)
I know this is old, but is it valid for RIFE?
I copy and paste the script and can I use rife in the transcoding? Sorry, I'm very new to this.
I know this is old, but is it valid for RIFE?.
nope
Still using this in 2025. I would swap it out but I haven't seen other similar/better scripts. My animes still look smooth in 120fps
levels.pel = 1;
levels.scale.up = 1;
levels.scale.down = 1;
levels.full = true;
analyse.block.w = 32;
analyse.block.h = 32;
analyse.block.overlap = 2;
analyse.main.levels = 4;
analyse.main.search.type = 8;
analyse.main.search.distance = -8;
analyse.main.search.coarse.type = 4;
analyse.main.search.coarse.distance = -16;
analyse.main.search.coarse.bad.range = 0;
analyse.main.penalty.lambda = 1.0;
analyse.main.penalty.plevel = 4.0;
analyse.main.penalty.lsad = 800;
analyse.main.penalty.pnew = 5;
analyse.main.penalty.pglobal = 5;
analyse.main.penalty.pzero = 10;
analyse.main.penalty.pnbour = 5;
analyse.main.penalty.prev = 0;
analyse.refine[0] = {thsad:2000, search:{distance:2, type:4}};
smooth.algo = 23;
smooth.scene.mode = 0;
smooth.mask.cover = 20;
smooth.mask.area = 8;
smooth.mask.area_sharp = 0.70;
smooth.scene.limits.m1 = 3600;
smooth.scene.limits.m2 = 7200;
smooth.scene.limits.scene = 10400;
smooth.scene.limits.zero = 10;
smooth.scene.limits.blocks = 60;Try and tell me if its good or not
As suggested by @AutumnQueen, I've deleted the "not useful" configs. Some of you downloaded the attachment. Others hopefully found some use too 
I see a few people have downloaded the config and I would love some feedback. I'm particularly interested to hear about smoothness or lack of and CPU/GPU type and usage. I'm thinking about modding this for 60fps but not sure if that would be interesting since I'm sure others have already done that.
I think I understand how the previous list of settings were created. Once that clicked, it made it easier for me to make some changes and revert a couple of settings back to default. Short version; remove the pnew and pzero penalties. I also set lambda penalty to 4.0 but this is pure guesswork. But with these changes I was able to revert Decrease grid step from local, back to global. I also disabled Artifacts masking but I assume this was overridden anyway.
Why don't you paste the settings here for easier copying
My previous settings were very good, besting RIFE in almost every way. But using the OP settings as a baseline, I have been able to improve on my previous settings. I also have a little better understanding of how SVP actually works. So this was my pay it forward. But with no feedback it was difficult to tell if it's even worth continuing this. But maybe this is enough. I hope it's been useful
Nope, not useful.
Nope, not useful.
Cool
SmoothVideo Project → Using SVP → My Custom Script Setting Opinion (Smooth like DmitriRender)
Powered by PunBB, supported by Informer Technologies, Inc.