26 (edited by RickyAstle98 07-04-2024 13:53:16)

Re: Вопросы про RIFE

Chainik wrote:

> к сожалению вы мне дали онлайн пакет

в смысле? это - оффлайн пакет(ы)

Я не смог зайти в SVP4 не введя лицензионные данные без интернета! Да и mpv вылез новый! Возможно я слегка ступил, но ошибку данные пакеты не решили, протестированы оба!
Значит дело в видеокарте, она откинулась, но скорее всего откинулся mpv с новыми моделями!

27 (edited by flowreen91 19-05-2024 08:40:02)

Re: Вопросы про RIFE

RickyAstle98 wrote:

2) Начиная с моделей 4.9 по 4.16 кадры будто сдвигаются в обоих направлениях, видео перестало быть плавным

Hmm, did you try these too in order to fix the frames stutters?
1. stop using Lossless Scaling on top of SVP
2. change MPV config to prevent additional frame blending like:
video-sync=audio
interpolation=no
gpu-api=d3d11
hwdec=no
3. RIFE GPU threads = 2 (can interpolate better than 1 thread)
4. frc.frame.resize to smaller resolution until your GPU has enough extra bandwidth for the worse case scenario interpolation scenarios
5. check if issue persists on v1 without performance boost (in case there are major internal differences between that and v2 with performance boost that we don't know about)
Compare it on a basic predictable panning scene like:
https://drive.google.com/drive/folders/ … nG0qJnlw4I

28 (edited by RickyAstle98 08-04-2024 09:33:43)

Re: Вопросы про RIFE

flowreen91 wrote:
RickyAstle98 wrote:

2) Начиная с моделей 4.9 по 4.16 кадры будто сдвигаются в обоих направлениях, видео перестало быть плавным

Hmm, did you try these too in order to fix the frames stutters?
1. stop using Lossless Scaling on top of SVP
2. change MPV config to prevent additional frame blending like:
video-sync=audio
interpolation=no
gpu-api=d3d11
hwdec=no
3. RIFE GPU threads = 1 (in case multi threading would break the interpolated frames order)
4. frc.frame.resize to smaller resolution until your GPU has enough extra bandwidth for the worse case scenario interpolation scenarios
5. check if issue persists on v1 without performance boost (in case there are major internal differences between that and v2 with performance boost that we don't know about)
Compare it on a basic predictable panning scene like:
https://drive.google.com/drive/folders/ … nG0qJnlw4I

Done all the steps, issue persist, and your test video isnt smooth even before interpolation, my test movie scenes behavior exactly the same, frames moving backwards and forwards! sad

29 (edited by RickyAstle98 08-04-2024 10:30:28)

Re: Вопросы про RIFE

flowreen91 wrote:
RickyAstle98 wrote:

2) Начиная с моделей 4.9 по 4.16 кадры будто сдвигаются в обоих направлениях, видео перестало быть плавным

Hmm, did you try these too in order to fix the frames stutters?
1. stop using Lossless Scaling on top of SVP
2. change MPV config to prevent additional frame blending like:
video-sync=audio
interpolation=no
gpu-api=d3d11
hwdec=no
3. RIFE GPU threads = 1 (in case multi threading would break the interpolated frames order)
4. frc.frame.resize to smaller resolution until your GPU has enough extra bandwidth for the worse case scenario interpolation scenarios
5. check if issue persists on v1 without performance boost (in case there are major internal differences between that and v2 with performance boost that we don't know about)
Compare it on a basic predictable panning scene like:
https://drive.google.com/drive/folders/ … nG0qJnlw4I

I found a temporary FIX for my issue, I detect RIFE prerendered video has no issues while playback, only realtime playback (even just only 24>48 hd source, easy for 4070 isnt it?) improper encoded movies MKV containers broke models frame handling, because I reencoded same video to MKV back again, and voila no issues! Also this is HEVC issue, LOL!

30 (edited by flowreen91 08-04-2024 10:58:38)

Re: Вопросы про RIFE

RickyAstle98 wrote:

I found a temporary FIX for my issue, I detect RIFE prerendered video has no issues while playback, only realtime playback (even just only 24>48 hd source, easy for 4070 isnt it?) improper encoded movies MKV containers broke models frame handling, because I reencoded same video to MKV back again, and voila no issues! Also this is HEVC issue, LOL!

LOL! Well done for finding the origin of the issue.
@Chainik can u add something from SVP side to correct/prevent/fix this blocker issue?
We don't want other SVP users to go through all the stress of trying to figure it out like Ricky just did.

31 (edited by RickyAstle98 08-04-2024 11:25:51)

Re: Вопросы про RIFE

flowreen91 wrote:
RickyAstle98 wrote:

I found a temporary FIX for my issue, I detect RIFE prerendered video has no issues while playback, only realtime playback (even just only 24>48 hd source, easy for 4070 isnt it?) improper encoded movies MKV containers broke models frame handling, because I reencoded same video to MKV back again, and voila no issues! Also this is HEVC issue, LOL!

LOL! Well done for finding the origin of the issue.
@Chainik can u add something from SVP side to correct/prevent/fix this blocker issue?
We don't want other SVP users to go through all the stress of trying to figure it out like Ricky just did.

I think its user related issue a bit, someone with the same GPU maybe not facing this issue, so we cant figure out what is going on?
But my friend has same GPU and almost same PC build, same issues, same problems, same errors!
Thats how the issue look like (video is predelayed for showcase purposes)
https://drive.google.com/file/d/1tGmkW6 … sp=sharing

Re: Вопросы про RIFE

Я только начал пользоваться RIFE, не знаю его возможностей, поэтому хотел бы узнать: то, что текущая версия в SVP не справляется с удвоением кадров для видео 1080р60 на AMD 7900XTX - это нормально или что-то с моей системой не то? Версия дров 23.11.1, обработка работает в 2 потока.

Re: Вопросы про RIFE

Santr wrote:

удвоением кадров для видео 1080р60

Doubling a 60 fps video requires more power than doubling a 24 fps video.
For my RTX 4080 it becomes watchable if i resize it to 540p using
resize -9600540
https://gyazo.com/52607f2009d1dae6c41a2939d7b62c04

Re: Вопросы про RIFE

flowreen91 wrote:

For my RTX 4080 it becomes watchable if i resize it to 540p using
resize -9600540
https://gyazo.com/52607f2009d1dae6c41a2939d7b62c04

Ah, thanks, then it's normal. I'd rather not downsize it, so I guess it's better to stick with old interpolation methods for such heavy cases - those can handle x4 for 1080p60 even at max settings, which is sufficiently smooth.

35 (edited by Nurk 22-05-2024 12:27:09)

Re: Вопросы про RIFE

долго не обновлял драйвер и сидел на 546.33, обновился до 555.85, и RIFE стал хуже работать, раньше спокойно тянул 1080p x4, теперь же только 1080p x3. У кого-то еще есть такая проблема? RTX 3090

Re: Вопросы про RIFE

работает - не трогай (с) народная мудрость

кто-то вон пишет про влияние HAGS на производительность RIFE
https://obsproject.com/wiki/How-to-disa … -Scheduler

Re: Вопросы про RIFE

Chainik wrote:

работает - не трогай (с) народная мудрость

это всё хорошо, но не только же для SVP видеокарта нужна

Re: Вопросы про RIFE

ну тут только Хуангу письма писать, больше посоветовать нечего
кроме HAGS вкл/выкл

Re: Вопросы про RIFE

Может ОП обновил что-то еще? У меня как работало 1440P x 2 с 85-90% нагрузкой так и работает