New RIFE filter - 3x faster AI interpolation possible in SVP!!! (Page 55 of 84)

i'm seing artifacts in 4.15 lite that i don't see in 4.15

Two bits of news. A while ago I said that increasing the frame rate can help with certain fast movement artefacts. Well initial testing suggests that since v4.15 lite is actually "lite",  I'm now able to run SVP at 72fps and it is helping with certain specific types of fast movement artefacts. It's dropping exactly 12 frames a second which makes sense but the helpful effect is not being lost. I still need to do more testing but this looks promising.

Also, Tensorrt v10.0.0 is available. I couldn't believe how bad the benchmarks look but the notes confirm that this is definitely one to avoid.

Nope. But YMMV.

has anyone tried the option builder_optimization_level=5?
https://github.com/AmusementClub/vs-mlr … g/v14.test

builder_optimization_level – The builder optimization level which TensorRT should build the engine at. Setting a higher optimization level allows TensorRT to spend longer engine building time searching for more optimization options. The resulting engine may have better performance compared to an engine built with a lower optimization level. The default optimization level is 3. Valid values include integers from 0 to the maximum optimization level, which is currently 5. Setting it to be greater than the maximum level results in identical behavior to the maximum level.

someone here said lvl 5 has better performance.
https://github.com/Blinue/Magpie/discussions/844

But what TRT doing in my case? No drops no stutters but not smooth (any after 4.10), even with new optimization level, ah yes wait >
Builder optimization level 5 (default 3), adds another 3 minutes to build engine cache lock and only 3% performance!

Simple test with fastest model >
4.4 opt level 1 > engine build time ~32 seconds (-2% performance)
4.4 opt level 2 > engine build time ~70 seconds (-1% performance)
4.4 opt level 3 > engine build time ~120 seconds *
4.4 opt level 5 > engine build time ~300 seconds (+3% performance)

Update:
I think my initial impressions were correct. For certain artefacts, Rife v4.15 lite 72fps works almost as well as Rife 4.15 60fps. For others they are about the same with both running at 60fps. So Rife v4.15 lite 72fps is not quite as smooth as 60fps but it minimises certain artefacts while being  smooth enough to not be a problem.

Is that for build_optimization or running at 72fps?

BTW Thanks for the reminder. The last time I tried this I remember seeing warnings generated, possibly because it was running out of workspace. Now I get no more errors and I think it does help a little.

That's weird but I am interested to see the rest of your findings. But I don't like the fast action artefacts that models below 4.15 produce. Running at 72fps there are some slow pan issues on a couple of movies but for now I will stick with v4.15 lite/72fps.

I deleted my reply so i don't have anything to reattach. Don't worry about it

1080@x5 HAGS OFF 4t build 5 in 331.55 seconds
Output 8000 frames in 45.79 seconds (174.70 fps) 4.15 lite
Output 8000 frames in 52.86 seconds (151.35 fps) 4.15

1080@x5 HAGS OFF 4t build 4 in 101.19 seconds
Output 8000 frames in 37.26 seconds (214.68 fps) 4.15 lite
Output 8000 frames in 54.36 seconds (147.16 fps) 4.15

1080@x5 HAGS OFF 4t build 3 in 70.20 seconds
Output 8000 frames in 39.49 seconds (202.59 fps) 4.15 lite
Output 8000 frames in 51.14 seconds (156.42 fps) 4.15

1080@x5 HAGS OFF 4t build 2 in 41.65 seconds
Output 8000 frames in 36.79 seconds (217.45 fps) 4.15 lite
Output 8000 frames in 51.62 seconds (154.99 fps) 4.15

1080@x5 HAGS OFF 4t build 1 in 41.60 seconds
Output 8000 frames in 36.44 seconds (219.55 fps) 4.15 lite
Output 8000 frames in 52.00 seconds (153.83 fps) 4.15

1080@x5 HAGS OFF 4t build 0 in 22.14 seconds
Output 8000 frames in 42.09 seconds (190.09 fps) 4.15 lite
Output 8000 frames in 63.52 seconds (125.95 fps) 4.15

4Kx2 HAGS OFF 4t build 0 in 23.42 seconds
Output 2000 frames in 36.49 seconds (54.80 fps) 4.15 lite
Output 2000 frames in 51.31 seconds (38.98 fps) 4.15

4Kx2 HAGS OFF 4t build 1 in 77.06 seconds
Output 2000 frames in 33.16 seconds (60.32 fps) 4.15 lite
Output 2000 frames in 39.89 seconds (50.14 fps) 4.15

4Kx2 HAGS OFF 4t build 2 in 88.97 seconds
Output 2000 frames in 33.50 seconds (59.69 fps) 4.15 lite
Output 2000 frames in 40.41 seconds (49.49 fps) 4.15

4Kx2 HAGS OFF 4t build 3 in 135.63 seconds
Output 2000 frames in 33.19 seconds (60.26 fps) 4.15 lite
Output 2000 frames in 38.83 seconds (51.51 fps) 4.15

4Kx2 HAGS OFF 4t build 4 in 172.76 seconds
Output 2000 frames in 34.21 seconds (58.46 fps) 4.15 lite
Output 2000 frames in 39.08 seconds (51.17 fps) 4.15

4Kx2 HAGS OFF 4t build 4 in 566.31 seconds
Output 2000 frames in 33.42 seconds (59.85 fps) 4.15 lite
Output 2000 frames in 39.04 seconds (51.23 fps) 4.15

well just stick with build 3 (default) or build 2 for faster build

Try to search "target" in the Application Settings and specify the exact value of your monitor:
https://gyazo.com/e9ccf345121d821d3180a40625c49bb4