You are not logged in. Please login or register.
SmoothVideo Project → Using SVP → SVPlight not working with Prismatik (Adalight)
When I open SVPlight settings and set it to Prismatik is says OK in the hardware section, but only the first 10 LEDs ever light up in the settings box, and when I try turning SVPlight on with video playing none of them light up at all.
I'm using 0.9.4, and 5.10.5 of Prismatik. Hardware is Adalight. Is it just a matter of waiting for a newer version of Prismatik?
spaid
but only the first 10 LEDs ever light up in the settings box
how much LEDs do you have?
have you imported settings from any Prismatik profile?
are first 10 LEDs working in the "Adjust" tab of SVPlight settings window?
what is Prismatik configuration? could you attach here some files from %homepath%\Prismatik folder?
I have 50 LEDs total. When I import my settings from Prismatik it adds 50, but most of them are stacked in the top left corner.
The 10 that do light up in the different colours seem to be working, as they light up brighter when I mouse over them, but even manually adding 50 it's still only 10 that work.
spaid
When I import my settings from Prismatik it adds 50, but most of them are stacked in the top left corner.
hmm 
there're strange capture areas coordinates in your .ini file
do you have several monitors and LEDs're attached to the second one?
spaid
even manually adding 50 it's still only 10 that work
it looks like an error in Prismatik's remote API engine
i need to check
===
found the similar issue on their issues tracker - https://code.google.com/p/light-pack/is … tail?id=34
so please try this solution:
1. manually set "number of light zones" in SVPlight to 50, click on "set" link (to avoid SVPlight's import bug)
2. open Prismatik, change number of LEDs to any value and then back to 50 (to avoid Prismatik's remote API bug)
3. test lights in SVPlight
===
it's very easy to test w/o SVPlight at all
run Prismatik
Win+R - type 'cmd' to open console window
type
telnet 127.0.0.1 3636it'll show "Lightpack API blah-blah"
type
locktype
setcolor:40-255,0,0;it should light up 40th LED with red color
Chainik
do you have several monitors and LEDs're attached to the second one?
Yes, my TV is connected as my second display. I tried setting up the Prismatik zones on my primary monitor and importing into SVPlight, and that mostly seemed to work as far as the zone layout went.
Chainik
so please try this solution:
Tried this with no luck, still only 10 lighting up. Is there a way to change the number of LEDs in Prismatik other than running the configuration wizard again, as that's what I did.
yeah, they've simplified UI in the latest versions 
so try to set LEDs color with direct API from cmd window
I suppose it 'll work for LEDs number 1-10 and won't work for others
I'll contact Lightpack developers in that case 
just forgot to say if lights are off you need to turn them on first with the command
setstatus:on
lp-api.png 3.07 kb, 459 downloads since 2014-02-08
Yep, turning them on via telnet works up until number 10, any higher than that and it just returns "error."
So the only option now is to use some old middle-2013 version that allows to set number of leds on the fly
I have a question: Are there any plans for supporting more ambilight systems? I have a "sedu-ambilight" (using 48 channels and 48 LEDs at the moment) which is not supported by svp light or prismatik.
Especially lightpack seems for me to be one of the poorer ambilight systems with using only a few "LEDs" and I 'm wondering why it is supported by default while more powerfull systems aren't supported or only with prismatik?
SVPuser
Are there any plans for supporting more ambilight systems?
Not now. May be. May be not 
why it is supported by default while more powerfull systems aren't supported or only with prismatik?
Cause Lightpack is the only complete system in production anyone can buy.
SmoothVideo Project → Using SVP → SVPlight not working with Prismatik (Adalight)
Powered by PunBB, supported by Informer Technologies, Inc.