You are not logged in. Please login or register.
SmoothVideo Project → Using SVP → Still having issues with blurays and 100% cpu load
When I'm using SVP on MPC HD all my cores hit 100% and I get messages from svp telling me my cpu load and how it's too hight and it's going to get jumpy.
Intel Core i5-4670K 4.4GHz Quad-Core
GTX 550Ti 2gb.
JT!
And what the problem?
OSD message must telling you:
SVP performance is too low.
Try to lower the profile settings.
If you dont know how to change profile settings then you can just reset profiles: SVP tray menu - Video profile - Reset to defaults - OK - Yes.
SVP will detect productivity of your system and choose profile with optimal settings automatically.
Ah, that's where that was! I was looking for that, but I was looking under "profile selection method".
I did this but I still have the same problem. Should I be expecting this from my hardware?
JT!
1. Your SVPmark results? I don't see it in the SVPmark online database.
2. Your CPU load at idle?
3. Additional info about playing video. SVP tray menu - Information - Additional info
1. No idea what or how to contribute to that, I'll look into it.
2. 9% or lower
3.
Last processed file parameters:
Filename: 00001.mpls
Frame size and frame rate: 1920x1080 pixels, 23.976 fps
Detected screen parameters
Screen size and refresh rate: 1920x1080 pixels, 60.07 Hz
Video smoothing info
Smooth factor: 5:2
Resulting video frame rate: 59.94 fps
Repeat 1 frame every 7.7 sec (without ReClock)
Selected profile: 1920x1080@24
Profile settings of video processing
[ExMethod=MSmoothFps_3] Frames interpolation mode: Adaptive (default)
[ExAlgo=13] SVP shader: 13. Standard (default)
[ExMulti=MON] Target frame rate: To screen refresh rate (default)
[ExBlockSize=16x16:2] Motion vectors grid: 12 px. Average 2 (default)
[ExRecalc=0:0] Decrease grid step: Disabled (default)
[TypeDist=Exh:-10:SATD] Search radius: Average (default)
[ExPel=2] Motion vectors precision: Half pixel (default)
[Badsad=1000:-24] Wide search: Average (default)
[ExSadml=0] Artifacts masking: Disabled (default)
[ExBlend=false] Processing of scene changes: Repeat frame (default)
[ExDwnResize=MON] Decrease frame size: To screen size
[ExConvertFps=false] Blend frames to screen refresh rate:false
Settings by menu
[svp_libflowgpu=1] GPU-acceleration (OpenCL): true
[ExThreads=0] Processing threads: Auto
[StereoMode=0] Stereo mode (3D): Plain 2D
[HandCrop=None] Frame crop: Disabled
[Borderlight=None] Outer lighting: Disabled
[EnableHWBorderlight=0] Use SVPlight: false
[HWBorderlightSettings=0] SVPlight settings...: false
[VDelay=0] Video delay: 0 ms
[ExDemo=0] Demonstration mode: false
[ExTearingTest=0] Tearing test: false
[EFrameDoubling=0] Variable frame rate repair: false
[StopSmoothDelayOnRewind=1] Turn off on seek: Turn off by 1 sec
JT!
SVPmark. It is performance test based on SVP algorithms.
I ask you to download it, launch, enter your forum login/pass into settings, run test and save results to online database.
How do I upload results?
SVPmark - Settings - input your user Name, Password from this forum - Check user - Run Benchmark! - [wait] - Share online
How do I "share online"?
SVPmark_Share_online_button.png 26.87 kb, 476 downloads since 2014-02-21
It's grayed out, I have my username and pass in there. What am I missing?
"Check user" button near login/pass at Settings page
Yeah I did that, still grayed out.
JT!
Then use 'Copy to clipboard' button and post results here. I think it will be enough to me to say what is the problem.
Test summary
-----------------------
Date: 2014-02-23T11:46:23
CPU: Intel Core i5-4670K @3400 MHz [4 threads]
GPU: NVIDIA GeForce GTX 650 Ti BOOST [ver.327.23]
Mode: FHD + GPU [9 threads]
Comment: 4400
Overall scores
-----------------------
Synthetic CPU: MC2405
Synthetic GPU: MG4226
Real-life: N/A
Details: synthetic
-----------------------
CPU: compose (single-threaded): 781
CPU: compose (multi-threaded): 2792
CPU: search (single-threaded): 572
CPU: search (multi-threaded): 2113
GPU: system -> GPU transfer: 1307
GPU: GPU -> system transfer: 1248
GPU: calculations: 1225
GPU: total score: 5198
Details: real-life /FHD
-----------------------
decode video: 11.23x (269.6 fps)
48 fps - vectors search: N/A
60 fps - frame composition: N/A
48 fps - [SVP] fastest: N/A
48 fps - [SVP] simple 1: N/A
60 fps - [SVP] good: N/A
60 fps - [SVP] high: N/A
60 fps - [SVP] highest: N/A
72 fps - [SVP] simple 2: N/A
MAG79
Synthetic scores are good.
Your system can not perform real-life subtest
48 fps - vectors search: N/A
It is bad because vector search it the main part of all algorythm. In your case it can't work properly without errors.
Do you know how to check overclock, overheating and CPU throttling? I think it is the problem.
You can use SVPmark test for this purposes. It can burn your CPU better other CPU stability tests. 
You need to get stability of your system first. After that SVP will start work properly in 99% cases.
I forget what program I used to stress test my cpu after overclocking, ran it for a couple of hours and no crashes. Certainly no overheating, never see anything past 70c, I don't see why my cpu would be throttling. How would I go about finding all this out?
JT!
I can connect to your computer via teamviewer and try to search the cause of SVPmark N/A subtest results. Email me your ID in teamviewer and pass.
Thanks, but I don't let people take control of my pc I don't know.
JT!
In this case you need to solve problem yourself. I don't know what is wrong in your system.
Try to disable OSD: SVP tray menu - settings - uncheck option "Show OSD messages". Maybe it is right what you need.
SmoothVideo Project → Using SVP → Still having issues with blurays and 100% cpu load
Powered by PunBB, supported by Informer Technologies, Inc.