26 (edited by THX-UltraII 07-12-2012 12:01:38)

Re: how do I set svp

by the way MAG, I thought that when your display has 50, 59 and 60 options 59 is best to pick? You are saying 60 in this topic..... Or is this only for HTPC/Nvidia users?

Re: how do I set svp

THX-UltraII
Best refresh rate is multiply to framerate wink

Re: how do I set svp

MAG79 wrote:

THX-UltraII
Best refresh rate is multiply to framerate wink

? I thought it was best to put it on 'To Screen Refresh Rate' and put the HTPC on 59Hz?

Re: how do I set svp

THX-UltraII
Ok. Let start from beginning.
1. What frame rate on file: 23.976, 24, 25, 29.97 or 30 fps?
2. What you mean under 59 Hz? It is only "name" of real refresh rate 59.XXX. And XXX is different from system to system.

I just say what if you going to view 23.976 fps movie with minimum artifacts then you must point multiply refresh rate: 23.976*2 = 47.952 Hz or 23.976*3 = 71.928 Hz.
In this case you will see all source frames at the output.

Re: how do I set svp

MAG79

1. 23,976 content (this is what I only play)
2. I know it s only a name but I thought that on most NVIDIA settings 59 = 59.94 and that is the one that we want to use I thought......

My display device (Sony HW50 front projector) supports only 1080/24p, 1080/50p and 1080/60p

Re: how do I set svp

THX-UltraII
My monitor Acer AL2623W when I choose 59 sets refresh rate as 59.913 Hz
It is less than 59.94 for NTSC video content at 60000/1001 speed.

My display device (Sony HW50 front projector) supports only 1080/24p, 1080/50p and 1080/60p
My display supports only 59 and 60 when windows installs. But I can add new custom resolution (and refresh rate) if monitors is connected to nVidia card.

But now I connect it to Intel HD Graphics 4000. It is no way to change refresh rate or add custom resolution. I have only two available values: 59 and 60. Both get refresh rate as 60.146 Hz hmm

So my "59" mode is 60.146 Hz. wink

Re: how do I set svp

So conclusion for my setup is that it is best to keep using the 59 profile of Nvidia correct?

Re: how do I set svp

THX-UltraII
I did not hear what your real refresh rate when you setup "59" mode?
You can see it in madVR at the top of statistic when press Ctrl-J.

Your aim is 59.94 Hz.

Re: how do I set svp

MAG79
Jup, I got 59.94XXX reported by madVR. madVR tells me 'one frame dropped every 21 minutes'. That would be approx. 3 dropped frames per hour. But I get 20-30 dropped frames in one hour. Do I have to ask madshi (madVR author) what could this be or do you have an idea too maybe?

Re: how do I set svp

http://forum.doom9.org/showpost.php?p=1 … ount=16114