You are not logged in. Please login or register.
SmoothVideo Project → Using SVP → Which framerate to use?
Hello,
so I've recently purchased pro version of SVP and a 165hz screen and I was wondering, how should I go about getting the smoothest svp experience?
Should aim for framerate matching the screen option, or maybe go for video x5, or just lock it at 120fps and set the screen to 120hz?
The best fluidity you will see at maximum framerate = 165 Hz
The best quality you will get at odd multipe frequency x1, x3, x5, x7
For usual video 24 fps it will be = 24 Hz, 72 Hz, 120 Hz, 168 Hz.
Does your screen support overclocked frequency of 168 Hz?
The best fluidity you will see at maximum framerate = 165 Hz
The best quality you will get at odd multipe frequency x1, x3, x5, x7
For usual video 24 fps it will be = 24 Hz, 72 Hz, 120 Hz, 168 Hz.Does your screen support overclocked frequency of 168 Hz?
That is going to need a ton of CPU / GPU power though.
You should just choose option Screen refresh rate/2 or Screen refresh rate/3 provided you can overclock screen panel to 168Hz.
nope, screen caps out at 165hz, what about if I drop it down to 120 for 5x rate, would that produce good results?
144?
I could set it to 144hz, yes, but that would be x6 framerate, whereas MAG79 said that using an odd multiplier is better
I could set it to 144hz, yes, but that would be x6 framerate, whereas MAG79 said that using an odd multiplier is better
You should just choose option Screen refresh rate/2....
how exactly does screen refresh rate/2 works, like just flat out 165/2 = 82,5 fps?
Like for each 2 screen draw calls there's 1 frame prepared? wouldn't aiming for 120fps be smoother with G-Sync on?
SmoothVideo Project → Using SVP → Which framerate to use?
Powered by PunBB, supported by Informer Technologies, Inc.