Re: 3D movies with SVP

Fanty1972
Happy Hour
Ough! Thank you.

It is serious problem. In English I know more then one word containing 'hou'.
hour, house, Houston

I need idea how to avoid such problems. hmm

Re: 3D movies with SVP

Thats the way to autodetect 3D video? so for half SBS i would have to put 'hsbs' in the filename?

What is the difference between Full SBS and Half SBS with SVP? Both seem to work identical.

Re: 3D movies with SVP

i just finished my test about this feature too... been wondering about this feature for a long time now smile

my test movie was a HSBS Pacific Rim 3D

Advantage when Stereo Mode (3D) is ON: (HSBS)
- less artifact around people while walking (especially noticeable when they arrived on Hong Kong Base scene)

Disadvantage that i noticed:
- it seems like smoothness is reduced especially when panning.

my specs:
Processor: Intel i7 3610QM
GPU (which i always disable): GT 630m
RAM: 8gb

when turning this feature ON, does it really makes it less smoother? or my CPU is weak for these?

i even tried different Stereo-frames order.
i tried to switch between Left to Right and Both Frames Simultaneously
still not as smooth as 2D setting (2D is smooth but with artifacts)

i even tried to lower some settings when Stereo Mode (3D) is enabled still not smooth...

what else can i try?

this is my config:
http://i39.tinypic.com/j0b9yw.jpg

i even tried to lower Motion Vector Precision to TWO PIXEL and Search Radius to Small and Fast.

Re: 3D movies with SVP

HeavyGat
How test line moves (SVP tray menu - Tearing test)?
Flawlessly or with jerks?

30 (edited by HeavyGat 19-11-2013 14:54:54)

Re: 3D movies with SVP

MAG79
thanks for the reply buddy.

i just finished checking it now. umm the Tearing Test was like running on 24fps (but the svp icon says it on 60fps)
when Stereo Mode (3D) was ON.

and what Stereo-frames Order should i use?
Left first, then Right (given that the format is Left to Right) or Both Frames Simultaneously?

are these settings more CPU intensive than 2D mode?

Re: 3D movies with SVP

HeavyGat
the Tearing Test was like running on 24fps (but the svp icon says it on 60fps)
when Stereo Mode (3D) was ON.

It is bad. You need to find the cause of this. What player do you use?

what Stereo-frames Order should i use?
For active 3D-glasses (shutter glasses) usualy greate works "left then right". In some case you need "right then left".
For passive 3d-glasses (with polarized lenses) you need "simultaneously".
In any case you can run Tearing Test and try them all. Tearing test line must move smoothly and without double contours when you view without 3D-glasses.

are these settings more CPU intensive than 2D mode?
Yes. "left then right" and "right then left" are more CPU intensive.

32 (edited by HeavyGat 20-11-2013 12:03:08)

Re: 3D movies with SVP

MAG79
It is bad. You need to find the cause of this. What player do you use?
- im using the same MPC-HC that is included in SVP full version. i even tried using GPU acceleration (MadVR's) (nVidia GT630m) but still the 24fps-look is there.. sad
for the audio, i use ReClock. what else can i try?...

For passive 3d-glasses (with polarized lenses) you need "simultaneously".
- thanks! im using LG's Passive 3D (trumotion off and letting the SVP do the magic  smile )

Yes. "left then right" and "right then left" are more CPU intensive.
- thanks for this info too! lucky that im on Passive 3D and i'll be using the "Simultaneously/Both" setting smile

Re: 3D movies with SVP

HeavyGat
what else can i try?
Try to install LAV splitter: SVP\LAV\install_splitter.bat

34 (edited by HeavyGat 21-11-2013 00:44:47)

Re: 3D movies with SVP

MAG97
thanks! i'll check it now and update this post smile

update:
it still has the 24fps-look on it sad
i even tried putting (Prefer) LAV Splitter in External Filters

i checked the CPU usage.. it sits around 21-27% only...

ohh.. is there still a way to make it smooth with Stereo Mode (3D) on?

another update:
now its weirder coz i just checked the CPU usage while using both
2D mode and Stereo Mode (3D) on, and its surprising that while using the:
2D mode, it is waaaay smoother, 60fps-look but the CPU usage is around 60-75% but its smooth

but when Stereo Mode (3D) is on, im having a 24fps-look even the CPU usage just sits around 21-27% only..

so Stereo Mode (3D) SHOULD run smoother right? coz it also helps to lessen the CPU usage... is my theory about this thing supposed to be right buddy?

Re: 3D movies with SVP

HeavyGat
2D mode... CPU usage is around 60-75%
It is normal.

Stereo Mode (3D)... CPU usage just sits around 21-27% only
CPU usage value must be close to 2D mode.
Low CPU usage is a signal about something is wrong. What CPU usage of playing video without SVP?
Close SVP and check.

Re: 3D movies with SVP

MAG79
just finished checking without SVP:
when SVP is disabled, my CPU usage sits around 5-13% only... sad

what might be the cause of this... sad

again thanks for the replies and helping me out about this one.
i really appreciate it buddy.

what else can i try?

btw, i tried using higher profile (higher than "after reset" profile, default) even the lower setting profiles..
still gives me the 24fps-look with Stereo Mode (3D) on. sad but the icon says its running at 59.94fps

Re: 3D movies with SVP

HeavyGat
How many displays are enabled when you are watching 3D?

Re: 3D movies with SVP

MAG79

just 1 display, only the 3D TV.

i also tried setting my Power Plan to High Performance, just incase this info will help to troubleshoot my problem..

Re: 3D movies with SVP

Fixed problem with wrong 3D detection for file names like "Happy Hour"
Fixed "24fps-look" for 3D movies.
Try SVP Manager modification here.

Re: 3D movies with SVP

thanks for the update MAG79 !

i'll try this later smile