Nope, not useful.

Shame though coz now I've worked out how the original settings were created I was able to make more sense of what should actually be changed. Most of the changes in the OP are not unecessary at 120hz and with some tweaks probably not needed at 60Hz either. But no problem. Cool

levels.pel = 1;
levels.scale.up    = 1;
levels.scale.down    = 1;
levels.full     = true;
analyse.block.w    = 32;
analyse.block.h    = 32;
analyse.block.overlap    = 2;
analyse.main.levels    = 4;
analyse.main.search.type   = 8;
analyse.main.search.distance = -8;
analyse.main.search.coarse.type  = 4;
analyse.main.search.coarse.distance  = -16;
analyse.main.search.coarse.bad.range  = 0;
analyse.main.penalty.lambda   = 1.0;
analyse.main.penalty.plevel   = 4.0;
analyse.main.penalty.lsad   = 800;
analyse.main.penalty.pnew   = 5;
analyse.main.penalty.pglobal   = 5;
analyse.main.penalty.pzero   = 10;
analyse.main.penalty.pnbour   = 5;
analyse.main.penalty.prev   = 0;
analyse.refine[0] = {thsad:2000, search:{distance:2, type:4}};
smooth.algo = 23;
smooth.scene.mode = 0;
smooth.mask.cover = 20;
smooth.mask.area = 8;
smooth.mask.area_sharp = 0.70;
smooth.scene.limits.m1 = 3600;
smooth.scene.limits.m2 = 7200;
smooth.scene.limits.scene = 10400;
smooth.scene.limits.zero = 10;
smooth.scene.limits.blocks = 60;

Try and tell me if its good or not

As suggested by @AutumnQueen, I've deleted the "not useful" configs. Some of you downloaded the attachment. Others hopefully found some use too

I know this is old, but is it valid for RIFE?.

nope

I copy and paste the script and can I use rife in the transcoding? Sorry, I'm very new to this.

After days of trying these are the best settings you will get for max smoothness min artifact.

levels.pel = 2;
levels.gpu = 0;
...
smooth.scene.limits.m2 = 7200;
smooth.scene.limits.scene = 10400;

Artifact masking disabled. Svp shader 21. Frame rate conversion to screen.

This made my slow pans much smoother but also made artifacts more visible with fast motion action. I think it was always there but now I have clearly seen it, I can't unsee it. When you pause a fast action scene the screen looks like it is melting. So I've stopped using SVP.

Tried all settings variations suggested on this thread but I didn't see any improvement in the artifacts in this scene or smoothness compared to DmitriRender.

Is there any way to really make it smoother?

Are these settings suitable for cartoons and anime or are they meant to be used for live-action scenes?  Or are they meant for all of it?

Those settings is for all (Very smooth and low cpu usage as possible) - Especially for movies/actions

For anime if you see artifacts then change some values:  analyse.block.overlap    = 1;    and     smooth.mask.area = 16;

Nurk still looks better https://www.svp-team.com/forum/search.p … er_id=7145 if you dont have GPU/time for RIFE

Its almost same but with different values + added smooth.mask.area (replace SVP artifacts masking) and deleted "smooth.rate.num" and "smooth.rate.den" because its bad and useless (you have fps choices on SVP Control Panel)

RIFE is good but in very fast scenes does not smooth....