SmoothVideo Project — 10-bit output unplayable

Re: 10-bit output unplayable

null@example.com (BetteBalterZen) — Thu, 05 Dec 2019 19:19:59 +0000

I just tried with 60FPS and it runs butter smooth (with around 50/60 CPU%) - totally acceptable and a very enjoyable experience.

Thank you so much for support, Chainik - thank you

Re: 10-bit output unplayable

null@example.com (Chainik) — Thu, 05 Dec 2019 18:47:34 +0000

Ryzen 7 1700 @3500 MHz, 4K/10-bit is totally playable at auto setting #4 (*) and below with a ~50% CPU load

(*) Look at the log, there must be line like this:
> 21:42:30.179 []: Profile: using automatic profile #4 /film

===
> and so is 24FPS vs 100FPS

Ah, 100 fps? this could be too much for 4K/10-bit try 60 instead.

Re: 10-bit output unplayable

null@example.com (BetteBalterZen) — Thu, 05 Dec 2019 17:16:12 +0000

Yes sorry - I should have mentioned that.

But yes, 2160p 10-bit

Re: 10-bit output unplayable

null@example.com (Chainik) — Thu, 05 Dec 2019 17:13:48 +0000

are you talking about 4K/10bit ?

Re: 10-bit output unplayable

null@example.com (BetteBalterZen) — Thu, 05 Dec 2019 16:47:24 +0000

Seems like it comes down my hardware not being strong enough? Because moving it all the way to Performance did make it run better but still not good at all... So having a stronger CPU/GPU combination using "Higher performance" in SVP might do the trick?
I hope it's fixable though via some tweaks though :-)

Re: 10-bit output unplayable

null@example.com (BetteBalterZen) — Thu, 05 Dec 2019 16:37:27 +0000

I tried moving the slider all the way to Performance and it did run better but still choppy and unplayable :-/

Re: 10-bit output unplayable

null@example.com (Chainik) — Thu, 05 Dec 2019 16:22:16 +0000

move the slider to the left, "auto-adjusted" settings may not react to the 10-bit switch properly

10-bit output unplayable

null@example.com (BetteBalterZen) — Thu, 05 Dec 2019 16:15:10 +0000

Hello everyone - I was hoping someone could help me...

Playing 10-bit movies via SVP using MPV lags a lot - like it's running 1FPS. I can see my CPU is at peak 90-100% usage. I have a 8700K (6C/12T) and a GTX 1080Ti.
SVP is running with the self-optimized settings - only changed "allow_10bit" to "true" to make 10-bit output possible.
I'd love to make 10-bit work with interpolation from SVP because the difference between 8-bit and 10-bit is night and day, and so is 24FPS vs 100FPS...

So... Is my hardware just too weak or is there a trick to make it work?

Thank you :-)

Edit: I should say that playing 10-bit movies via MPV without SVP/interpolation works perfectly - just runs at native FPS, fx 24FPS