SmoothVideo Project — VC-1 movie problem

Re: VC-1 movie problem

null@example.com (whindson) — Mon, 27 Jun 2011 02:50:34 +0000

thanks MAG79
it is the filter problem,i used LAV FILTER FOR ts files,which caused the 48fps vc1 coded problem.
now i changed to potplayer internal filter,and now it is 60fps!!!

Re: VC-1 movie problem

null@example.com (MAG79) — Mon, 27 Jun 2011 02:36:09 +0000

whindson
Thank you. I see it is DS-filter trouble.

SVP said "Resulting video frame rate: 59.94 fps" but Renderer got only 48 frames each second.
It is well known trouble of filters interaction. I say about Splitter, Decoder and Renderer. Try to change each of them.

I will download your file and will try to find good filters for this VC-1 video too.

Re: VC-1 movie problem

null@example.com (whindson) — Mon, 27 Jun 2011 01:36:58 +0000

the video i tested is here:
https://skydrive.live.com/?wa=wsignin1. … 3E4D33!218
just download the "112" file

Re: VC-1 movie problem

null@example.com (whindson) — Mon, 27 Jun 2011 01:28:31 +0000

here is the 3x result and the attachment shows 60fps:

Last processed file parameters:
Filename: 112.ts
Frame size and frame rate: 1920x1080 pixels, 23.976 fps

Detected monitor parameters
Screen size and refresh rate: 1366x768 pixels, 60.065 Hz

Video smoothing info
Smooth factor: 3:1
Resulting video frame rate: 71.928 fps

Current detected profile: 1920x1080@23.976

Profile settings of video processing
[ExMethod=MSmoothFps_Complex] Smoothness improvement: Advanced
[ExAlgo=23] SVP-shader: 23. Complex
[ExMulti=3:1:3] Framerate change: Triple the frame rate (3x)
[ExMiniCount=1:1] Interpolated frames size: Full size
[ExRad=2p] Search radius: 2 pixels
[ExSearch=4] Search type: Hexagon
[ExPel=1] Motion estimation accuracy: To pixel
[ExRecalc=0] Recalculation of vectors: Do not recalculate
[ExBlockSize=16x16] Blocks size: 16x16 pixels
[ExOverlap=0] Blocks overlapping: No overlap
[ExMl=80] Contour artifacts suppression: Normal
[ExSadml=20] Bad areas artifacts suppression: Above normal
[ExSadgamma=1] Bad areas artifacts mask: Normal
[ExBlend=false] Processing of scene change: Frame repeating
[ExDwnResize=0] Reduce resolution: Do not reduce
[ExConvertFps=false] Frame blending to screen refresh-rate:false

Settings by menu
[svp_libflowgpu=1] GPU-acceleration (OpenCL): true
[ExTreads=8] Number of threads: 8
[Borderlight=0] Light at black borders: false
[ExStretch=0] Frame stretch: Do not stretch
[ExCrop=-1] Cropping: Do not crop
[VDelay=0] Video delay: 0 ms
[ExDemo=0] Demonstration mode: false
[ExTearingTest=0] Tearing test: false
[StopSmoothDelayOnRewind=0] Smooth on rewind: Turn off and on quickly

Re: VC-1 movie problem

null@example.com (whindson) — Mon, 27 Jun 2011 01:17:39 +0000

from fraps 3.2.6,and 48fps@60hz isn't smooth as 60fps.
the attachment is screen shot from potplayer playing vc1 coded video
add info:

Last processed file parameters:
Filename: 112.ts
Frame size and frame rate: 1920x1080 pixels, 23.976 fps

Detected monitor parameters
Screen size and refresh rate: 1366x768 pixels, 60.065 Hz

Video smoothing info
Smooth factor: 5:2
Resulting video frame rate: 59.94 fps

Current detected profile: 1920x1080@23.976

Profile settings of video processing
[ExMethod=MSmoothFps_Complex] Smoothness improvement: Advanced
[ExAlgo=23] SVP-shader: 23. Complex
[ExMulti=5:2:1mm1m] Framerate change: 24->60 1m (2.5x)
[ExMiniCount=1:1] Interpolated frames size: Full size
[ExRad=2p] Search radius: 2 pixels
[ExSearch=4] Search type: Hexagon
[ExPel=1] Motion estimation accuracy: To pixel
[ExRecalc=0] Recalculation of vectors: Do not recalculate
[ExBlockSize=16x16] Blocks size: 16x16 pixels
[ExOverlap=0] Blocks overlapping: No overlap
[ExMl=80] Contour artifacts suppression: Normal
[ExSadml=20] Bad areas artifacts suppression: Above normal
[ExSadgamma=1] Bad areas artifacts mask: Normal
[ExBlend=false] Processing of scene change: Frame repeating
[ExDwnResize=0] Reduce resolution: Do not reduce
[ExConvertFps=false] Frame blending to screen refresh-rate:false

Re: VC-1 movie problem

null@example.com (MAG79) — Sun, 26 Jun 2011 23:24:25 +0000

whindson
Can you show details: menu - show - additional information?
How did you know about 48fps? From Performance graphs window?

VC-1 movie problem

null@example.com (whindson) — Sun, 26 Jun 2011 14:41:07 +0000

i played vc1 coded movies with potplayer and turned svp on,frame rate won't go 60fps(in fact ,it stayed on 48fps) unless i set svp "frame rate changed" at 3x(72fps) or above.Same problem won't happen if i play avc/H264/X264 coded movies